Automate Philips Hue lighting control from the terminal via OpenHue CLI.
npx skills add https://github.com/erfanzar/Xerxes-Agents --skill openhue-erfanzar
Please help me install this Agent Skill. Skill: openhue Source: https://github.com/erfanzar/Xerxes-Agents/tree/main/src/python/xerxes/skills/openhue Command: npx skills add https://github.com/erfanzar/Xerxes-Agents --skill openhue-erfanzar
Turn-key command-line control for Philips Hue lighting, letting you manage lights, rooms, and scenes without leaving the terminal.
Install and pair the OpenHue CLI with your Hue Bridge and run a simple command to verify connectivity.
High-intent search queries and answers about installing and using this skill.
This Skill automates Philips Hue lighting control from the terminal, allowing you to turn lights on/off, adjust brightness, and change colors. It communicates directly with your Hue Bridge to execute these commands.
Yes, you can automate room-wide lighting scenes and brightness adjustments via the command line. The Skill sends commands to your Hue Bridge to activate scenes and manage room groupings.
Yes, you must pair the Hue Bridge and install the OpenHue CLI before managing smart home lights. These prerequisites ensure your terminal commands can successfully connect to and control your lighting setup.
The best way to trigger smart-home lighting workflows from automation scripts is using terminal commands to set lights and activate scenes. This allows scripts to respond to events like sunset or presence without manual intervention.
A limitation of managing IoT lights through a command line interface is that it requires the OpenHue CLI to be installed and the Hue Bridge to be paired. It is designed for terminal-based control rather than visual app interactions.
hcnimiControl Philips Hue lights and scenes via the OpenHue CLI.
kcns008Control Philips Hue lights, rooms, and scenes via the OpenHue CLI.
lxt070409Manage Philips Hue lighting and scenes through OpenHue CLI commands.
zengbaochengControl Philips Hue lights and scenes from the terminal via the OpenHue CLI.
